Gülmar-made laminate-faced panels and curved profiles, plus raw plywood supply.
Compact laminate table tops, also called solid HPL table tops, resistant to water, heat and wear. Cut to your form, size and decor for café, restaurant, office and school projects.
A compact laminate table top (you may know it as a solid HPL or phenolic table top) is cut from a homogeneous, durable panel of decorative laminate layers pressed under high pressure. The non-porous surface resists water, moisture, impact, wear and heat while remaining hygienic and easy to clean. Tops are made to order for café tables, restaurant tables, offices and schools in round, square or rectangular forms with a choice of dimensions and edge details. The top is a single 12 mm panel, and 23 decors are kept in stock.
Resists hot drinks, plates and moisture; resistant to swelling and staining.
The surface resists scratching and daily wear under heavy use.
Round, square and rectangle in any size and edge detail.
Round, square or rectangle; pick a standard size or have it made to your project.
Pick a size; your choice is added to the WhatsApp quote message.
Grooving option. Custom sizes produced separately.
Get a Quote
Pick a size; your choice is added to the WhatsApp quote message.
45° edge and grooving options. Custom sizes produced separately.
Get a Quote
Pick a size; your choice is added to the WhatsApp quote message.
45° edge and grooving options. Custom sizes produced separately.
Get a QuoteIn every option the top itself is a single 12 mm panel. At 24 and 36 mm, an edge build-up with 12 mm strips is added underneath along the edge band only (24 = 12 + 12, 36 = 12 + 12 + 12), while the center stays a single panel. At 50 mm, an apron edge is made with a 45° miter joint to the top.

12 mm · Single panel
The top is a single 12 mm compact panel; the edge can be finished square, rounded or beveled. A common choice for café and restaurant tables.

24 mm · Edge build-up
One 12 mm strip is added underneath the 12 mm top along the edge band only (12 + 12); the edge reads as 24 mm while the center stays a single panel. Seen from the side, two 12 mm layers show, with a thin line from the compact laminate’s black core between them.

36 mm · Edge build-up
Two 12 mm strips are stacked underneath the 12 mm top along the edge band only (12 + 12 + 12); the edge reads as 36 mm while the center stays a single panel. Seen from the side, three 12 mm layers show, with thin black core lines between them.

50 mm · Apron edge
A vertical apron (skirt) is made underneath along the edges and joined to the top with a 45° miter joint. The edge reads as 50 mm while the top surface stays a single panel — the thickest edge look among the options.
Your Quote Summary
Your shape, size, thickness and decor choices are added to the WhatsApp quote message automatically.
Table tops are produced from the broad Gentaş decor collection — hundreds of options including solid colors, woodgrains, natural stone, concrete, metallic and digital print.
Tap a decor; the color you pick is added to your quote message.
Selected decor:
G-COM is a table-top grade compact laminate. Its solid, homogeneous structure needs no separate edge banding and offers high resistance to water, heat and impact.
Scratch-resistant protective overlay
Hundreds of decors: solid, wood, marble, concrete, metallic
Homogeneous kraft layers pressed under high pressure
Single-piece edge machinable to 45° bevel or groove
It answers every challenge of hospitality and work spaces — heat, liquids, impact, stains and heavy use — with a single surface.
Highly resistant to moisture and spilled liquids.
Withstands hot drinks and plates.
The surface resists scratching under heavy use.
The non-porous surface resists stains and cleans easily; for projects that require an antibacterial surface, the Gentaş G-Bio option is available.
Light fastness is rated gray scale 5 on the data sheet; the tops are used indoors and outdoors.
Produced in any form, size and edge.
The same durable compact surface is configured specifically for the needs of each space.

Easy-to-clean café tops resistant to heavy use and hot drinks.

Stain- and wear-resistant restaurant surfaces in elegant decors.

Durable, low-maintenance work surfaces for modern offices.

Impact-resistant, hygienic and long-lasting school desk tops.

Compact tops for terrace, garden and open-air tables; G-COM compact laminate is used indoors and outdoors.

CNC-cut tops in project-specific form, size and edge detail.
A transparent process from your form and decor choice to an installation-ready table top.
The form, size and thickness to suit the space are defined together.
A color to suit your space is chosen from hundreds of decors.
Tops are cut to project form and size to the millimeter.
A 45° bevel, radius or groove detail is machined; an edge build-up with 12 mm strips is applied at 24/36 mm and an apron edge with a 45° miter joint at 50 mm.
Tops are securely packed and delivered fast.
Values are based on the Gentaş G-Com technical datasheet; our table tops are produced to project specification in various forms, thicknesses and decors.
We offer a wide range of standard sizes in round, square and rectangular forms. Sizes not on the list and custom forms are produced to project; the edge can be machined to a 45° bevel or groove.
The G-COM surface scores highly in the 180 °C dry heat test (EN 438-2) and resists everyday hot drinks and plates. We still recommend a trivet for very hot pans straight off the stove.
For café and restaurant tables a 12 mm single panel is the common choice. For a thicker-looking edge, a 24 or 36 mm edge build-up with 12 mm strips is applied; at 50 mm an apron edge is made with a 45° miter joint to the top. We determine the most suitable option together based on the leg system and usage intensity.
No. In every option the top itself is a single 12 mm panel. At 24 mm one 12 mm strip, and at 36 mm two 12 mm strips, are added underneath along the edge band only (12 + 12 / 12 + 12 + 12), so the edge reads at the chosen thickness while the center stays a single panel. Seen from the side, the 12 mm layers show with the compact laminate’s black core lines between them. At 50 mm, a vertical apron (skirt) is made along the edges and joined to the top with a 45° miter joint.
Both are common ready-made tops for café and restaurant tables; the difference is in how they are built. Tops known as Werzalit in Türkiye are molded under pressure from resin-bonded wood particles and carry a decorative surface; their shape and edge profile come from the mold. A compact laminate table top is solid high-pressure laminate through its whole thickness (HPL, EN 438-4): the top is a single 12 mm panel, the black core shows at the edge, and it is CNC-cut to the size and shape you need. Which one fits depends on the space, the size required and the look you want.
We keep 23 decors in stock. Beyond those, hundreds of Gentaş decors can be applied to order, including solid colors, woodgrains, natural stone/marble, concrete, metallic and digital print. We assess the options that suit your space together.
Yes. G-COM compact laminate is used both indoors and outdoors, so we also make tops for terrace, garden and open-air tables. G-EXT is the panel used for facade cladding.
Yes, on request. We are based in İzmir, Türkiye (Turkey). Send us the shapes, sizes, edge option, decor and quantity you need and the destination, and we will quote including packing.How ordering from abroad works
Share your form, size, thickness and decor preferences; we will recommend the best options and prepare a quote. Ordering from abroad? Add your quantity and destination and we will quote including packing.