Gülmar-made laminate-faced panels and curved profiles, plus raw plywood supply.
Compact floor covering for yachts, boats, caravans and wet areas: water-, moisture- and impact-resistant G-Com panels in standard sheets or CNC custom-cut.
Pressed under high pressure, our G-Com compact laminate floor panels deliver long-lasting, aesthetic flooring solutions for yachts and boats, caravans, tiny houses and wet areas. They offer high resistance to water, moisture, impact and wear; their non-porous surface is hygienic and keeps its form under heavy use. Panels can be supplied as standard sheets or produced specifically for your project with CNC custom cutting, shaping and patterning based on the dimensions and templates you send.
Highly resistant to swelling, bubbling and deformation in wet environments.
Keeps its form under heavy use and load.
Custom cutting, form and surface pattern to your dimensions and templates.
The same durable compact surface is configured for projects from wet areas to mobile living.
01
Water- and moisture-resistant, easy-to-clean compact flooring for boats and yachts; keeps its form under heavy use while giving an elegant look with its modern surfaces.
02
Impact- and wear-resistant caravan flooring that can be applied in thin sections.
03
Fast installation and a water-resistant surface; practical, durable flooring for tiny houses and prefab structures.
04
Water-resistant, easy-to-clean compact flooring for bathrooms, kitchens and boat interiors.
05
Moisture-resistant, easy-to-clean compact flooring for terraces and open areas; G-Com compact laminate is used indoors and outdoors.
G-Com is a solid compact laminate pressed under high pressure. Decorative on both faces, non-porous and water-resistant, it keeps its form for a long time on wet-area and heavy-use floors.
Non-porous, stain-resistant, easy-to-clean surface
A textured surface that improves grip on wet floors
Water-tight kraft layers pressed under high pressure
Water-resistant edge that needs no separate banding
It answers every challenge of wet areas and heavy use — water, moisture, impact and wear — with a single panel.
Resists moisture and constant wetness.
The non-porous surface makes it harder for dirt to adhere and cleans easily.
Withstands heavy use and load.
A textured surface option that improves grip on wet floors.
Easy to clean, needs little upkeep.
CNC custom cutting, form and pattern.
The table below summarizes the panel's typical performance against wet-area and heavy-use conditions; abrasion, impact, stain and boiling-water values are based on the Gentaş G-Com technical datasheet. Values are indicative; final performance varies with application and exposure.
For critical applications request a project-specific technical datasheet.
A transparent process from your dimensions and templates to an installation-ready floor panel.
Floor dimensions, templates and pattern requirements are defined.
The cutting plan, surface texture and pattern are prepared and approved.
Panels are cut to project form and size to the millimeter.
Dimensions, edges and surfaces are checked.
Panels are securely packed and installed on site.
Our floor panels can be produced as standard sheets or with project-specific cutting and patterning.
We use G-Com compact laminate for boat and yacht floors. It is a non-porous panel that resists water and moisture, swelling and bubbling. A textured surface option improves grip on wet floors. We CNC-cut the panel to your dimensions and templates. G-Com is used both indoors and outdoors.
A caravan floor has to be both thin and durable. G-Com compact laminate can be applied in thin sections; it resists impact and wear and cleans easily. We use the same panel in tiny houses and prefab structures.
Yes. G-Com is a compact laminate to the EN 438 standard. According to its datasheet, wear resistance is 485 revolutions and stain resistance is level 5 (EN 438-2). On floors it is used as standard sheets or CNC-cut to size.
Yes. G-Com is a compact laminate with a non-porous surface and very low water absorption (boiling water weight gain 0.55% · EN 438-2). In bathrooms, kitchens, boat interiors and wet areas it resists swelling and bubbling, and it cleans easily. We plan joints, edges and the substructure for wet-area conditions together at the project stage.
Both are possible. You can have the panels supplied as standard sheets or produced specifically for your project with CNC custom cutting, form and surface patterning based on the dimensions and templates you send.
We offer a textured surface option for wet areas; the texture improves grip on wet floors. If the specification calls for a slip-resistance class, we select the right texture and product for the application together.
No. The non-porous surface resists stains; it cleans easily with everyday cleaning and can be rinsed with water when needed. Unlike timber floors, it needs no painting, varnishing or oiling.
It can be produced from 2 to 25 mm in various thicknesses and supporting systems depending on the application (wet area, heavy-use floor, mobile living). We determine the most suitable thickness together based on load and span.
Share your dimensions, templates and environment; we will recommend the right panel, surface texture and pattern and prepare a fast quote.