Gülmar-made laminate-faced panels and curved profiles, plus raw plywood supply.
Short answer: There is no single price for compact laminate. The sheet price depends mostly on thickness, sheet size, decor and surface, product grade (standard or fire-retardant) and quantity. Cutting to size, edge work, hardware, installation and freight are added on top when you need them. That is why we publish no price list; we give the exact price in a quote once we know the application and the sizes.
"How much is compact laminate?", "What does a 12 mm compact laminate sheet cost?", "What is the price per square meter?" These are the questions we hear most. We are based in Bornova, Izmir, and have been a Gentaş main dealer since 2020. We deliberately give no figures here: sheet prices, exchange rates and project scope change too quickly for a published number to stay accurate. Instead, this guide walks through what actually moves the price.
| Factor | How it affects the price | What we ask |
|---|---|---|
| Thickness | A thicker sheet means more material and more weight. | Which thickness, and where will it be used? |
| Sheet size | A larger sheet has more square meters, and how your parts fit on it sets the waste. | Full sheets or parts cut to size? |
| Decor and surface | Solid colors, woodgrain or stone decors and special surfaces can be priced differently. | Is the color code or decor fixed? |
| Product grade | Standard compact, fire-retardant, laboratory and exterior panels are separate products with separate prices. | Does the spec call for a fire class or another requirement? |
| Quantity | One sheet and a project quantity are not priced the same way. | How many sheets or parts? |
| Cutting and edges | CNC cutting, holes, grooves, bevels and corner radii add machine time. | Is there a drawing or DXF? |
| Hardware and installation | For toilet cubicles, hinges, locks, legs and installation are separate lines. | Sheets only, or an installed system? |
| Freight | Distance and total weight set the freight. | What is the delivery address? |
Because a thicker sheet over the same area is simply more material. The Gentaş G-COM datasheet gives a density of 1.4 g/cm³, so one square meter weighs roughly thickness × 1.4 kg. That makes 8 mm about 11.2 kg/m², 12 mm about 16.8 kg/m² and 18 mm about 25.2 kg/m². These are calculated, approximate values. As weight goes up, handling, installation and hardware are planned to match.
Thickness changes the paperwork as well as the price. According to the G-COM datasheet, 12–25 mm is classified B-s1,d0 under EN 13501-1, while 8–10 mm is C-s1,d0. If your specification requires B-s1,d0, the price of a thin sheet is not relevant. For more detail, see our compact laminate thickness guide.
Knowing the right thickness before you ask for a price saves time. In our own work the typical match looks like this:
| Thickness | Typical use | Product |
|---|---|---|
| 6 mm | Facade cladding, exterior door facings | G-EXT (1300 × 3050 mm) |
| 8 mm | Furniture, partitions and cladding | G-COM SLIM |
| 10 mm | No single typical use; we assess it per project | G-COM |
| 12 mm | Toilet cubicles, urinal screens, changing cubicles, table tops and countertops | G-COM |
| 13 mm · 18 mm | Mostly named in specifications; our cubicle standard is 12 mm | G-COM |
| 12–20 mm | Laboratory worktops | G-Lab |
One note: table tops that look 24, 36 or 50 mm thick are not one solid thick sheet. The top is 12 mm; the thicker look comes from 12 mm strips added along the edge or from an apron. Details are on our compact table tops page.
If you are buying full sheets, ask for the sheet price; the sheet size is fixed, so the math is clear. If you are buying parts cut to size, the price also includes waste and CNC labor. So when you compare a per-square-meter figure found online with your own job, check three things: same thickness, same decor, cutting included or not. If one differs, the numbers cannot be compared.
The Gentaş collection has more than 400 decors; you can browse them on our colors and patterns page. Solid colors, woodgrain or stone decors and special surfaces may not be priced the same. Using several colors in one job also means opening a separate sheet for each color, which increases waste.
The grade matters too. The standard panel is G-COM compact laminate, used both indoors and outdoors. Jobs that require a fire-retardant grade use G-FIRE, facades use G-EXT and laboratories use G-Lab. These are different products with different prices. The full family is on the Gentaş laminate page.
Compact laminate needs no edge banding; the edge is beveled or rounded. But every hole, groove and corner radius is machine time. The clearer your drawing, the more accurate the quote. We cut in our own workshop; see CNC cutting services. Our typical CNC lead time is 7–10 days, and the exact time is confirmed in the quote.
For cubicle jobs, hinges, locks, legs and installation are added to the sheets. We cover those lines one by one in what drives toilet cubicle cost; the system itself is on the WC cubicle systems page. For dry, well-ventilated washrooms where budget matters, 12 mm CDF board is also an option; for wet areas we recommend compact laminate.
- Where the panel will be used (toilet cubicles, tables, countertops, walls, facade…)
- Thickness; if you are not sure, just tell us the application
- Color code or decor preference
- Full sheets or cut to size; part sizes and quantities
- Drawing or DXF if available; hole and edge details
- Specification requirements (such as fire class)
- For cubicles: room dimensions, number of cubicles, hardware and installation needs
- Delivery address and required date
Sending these over WhatsApp is enough. We settle the right thickness and decor with you and give the price in the quote.
Last updated: 2026-11
The sheet price depends on thickness, sheet size, decor and surface, product grade and quantity. Cutting to size, edge work, hardware, installation and freight are added as separate lines when needed. That is why we do not publish one list price; we give the exact price in a quote once we know the application and sizes.
Over the same area, a 12 mm sheet contains more material and weighs more: at the 1.4 g/cm³ density in the G-COM datasheet, 8 mm is about 11.2 kg/m² and 12 mm about 16.8 kg/m². In addition, 12–25 mm is classified B-s1,d0 and 8–10 mm C-s1,d0, so the thickness follows the fire class your spec requires.
For full sheets the price is worked out per sheet. For parts cut to size, waste and CNC labor are also part of the price. When you compare a per-square-meter figure, check that the thickness and decor are the same and whether cutting is included; if one differs, the numbers cannot be compared.
We do not publish a price list. Sheet prices, exchange rates and project scope change often, so a written figure goes out of date quickly. Send us the application, thickness, color and quantity over WhatsApp and we will prepare a quote for you.
Tell us where the panel will be used, the thickness, the color code, whether you want full sheets or parts cut to size, part sizes and quantities, any drawing, specification requirements, the delivery address and date. For cubicle jobs, add the room dimensions and the number of cubicles.
Tell us your need; we’ll recommend the right product and prepare a quote.