Gülmar-made laminate-faced panels and curved profiles, plus raw plywood supply.
Toilet cubicles and washroom cubicles (WC cubicles), with urinal, shower and changing-room partitions in 12 mm G-COM compact laminate for schools, malls, hospitals, hotels and sports facilities. CNC-cut to size, with stainless steel hardware and installation. A CDF board option is available for suitable dry rooms.
Toilet cubicles and washroom cubicles, also called WC cubicles and known as toilet partitions or restroom partitions in the US and the Gulf, are made here from solid, homogeneous compact laminate panels (often specified as phenolic panels) produced by impregnating cellulose layers with phenolic resin and pressing them under high pressure and temperature. The non-porous surface resists water, moisture and steam, as well as swelling, warping and mold, and withstands heavy cleaning. Its solid, single-piece structure needs no separate edge banding. Our standard panel for cubicles, urinal partitions and changing rooms is 12 mm G-COM compact laminate; for dry or splash-only rooms we also offer a 12 mm CDF board option where it suits the project.
Keeps its form in constantly wet environments; resists swelling, warping and rot.
The non-porous surface makes it hard for bacteria and mold to settle and is easy to disinfect.
Resists scratching, impact and wear under heavy public use.
The same water-resistant compact panel turns into different systems for every wet-area need. Where it suits, there is a CDF option too.
Toilet cubicle partitions, panels and cubicle doors made to project size from water-resistant 12 mm solid compact panels, with a floor-to-ceiling privacy option.
CDF option: in dry or splash-only, well-ventilated office, school, mall and factory washrooms.
Durable, easy-to-clean 12 mm compact laminate urinal partitions for hygiene and privacy, with concealed wall fixing.
CDF option: when raised clear of the floor and away from direct water. Where floors are washed often, G-COM.
Moisture-resistant, mold-resistant shower partitions for gyms, dormitories and pools.
Moisture-resistant, lockable 12 mm compact laminate changing-room and staff lockers for gyms, pools and schools.
CDF option: in dry changing rooms. For wet areas next to pools and showers, G-COM.
Water-resistant, durable compact seating benches for changing and dressing areas.
Whether you call them HPL lockers, changing-room lockers, staff lockers or gym lockers, they have to cope with moisture and frequent cleaning in gyms, pools, schools and factories. We build them from the same 12 mm compact laminate we use for cubicles; the panel is moisture-resistant and resists swelling and warping.
Doors are lockable and ventilated, and size and color are set per project. Because we make seating benches and changing cubicles from the same panel, the whole changing room can be finished in one material.
A 12 mm CDF option is available for dry changing rooms; in wet areas next to pools and showers we use compact laminate.
Our standard panel for cubicles and partitions is Gentaş G-COM compact laminate; it is used in wet areas with demanding hygiene and in dry rooms alike. In dry or splash-only, well-ventilated interiors we also offer 12 mm CDF board as an option where it suits the project. The conditions of the room decide which is right. For both materials we offer the board, CNC cutting, hardware and installation together.
Gentaş's phenolic compact laminate and the standard panel of the cubicle systems on this page. Made for rooms that are permanently wet, heavily used and frequently disinfected.
A 12 mm compact density fiberboard with a homogeneous black fiber core and melamine on both faces. At the same thickness it is roughly 25–30% lighter than compact laminate; it is moisture-resistant, but it is not waterproof. Available as sheets or as turnkey cubicles with cutting, hardware and installation.
Installation requirement: panels stand on legs clear of the floor, edges are sealed and the room is ventilated.
| Room / condition | G-COM | CDF |
|---|---|---|
| Dry or splash-only, well-ventilated office, school, mall and factory washrooms | Suitable | Suitable |
| Changing lockers and dry changing cubicles | Suitable | Suitable |
| Urinal partitions raised clear of the floor and away from direct water | Suitable | Conditional |
| Showers, pools, spas and wet changing areas | Suitable | Not recommended |
| Floors that are hosed down or washed with plenty of water | Suitable | Not recommended |
| Specifications requiring B-s1,d0 or "EN 438 compact laminate" | Suitable | Not recommended |
Indicative guidance: G-COM values come from the Gentaş datasheet, CDF values from the technical data of our 12 mm CDF board, and weights from a density × thickness calculation. We confirm the final choice with you at the quotation stage, based on room conditions and the specification.
The two materials have different color ranges: G-COM compact laminate offers the six solid colors we recommend for cubicles plus the full Gentaş decor collection, while 12 mm CDF board comes in four solid colors.
The code and name under each color are its Gentaş swatch-book equivalent. Woodgrain, stone and other Gentaş decors can also be used.
All Gentaş colors and decors
Ultra White ·
3103
Cream ·
3106 Beige
Office Gray ·
3153
Anthracite ·
3155 Anthracite Gray
Gray ·
3156 Dark Gray
Black ·
3190 Melamine-faced on both sides; the black core shows on machined edges.
Explore CDF Board
White
Cream
Office Gray
Anthracite
Can't find the color you need? Contact us for other colors and samples.
Ask about other colorsOn-screen colors are indicative; ask for a sample to confirm the exact shade.
G-COM is a phenolic compact laminate suited to wet areas. Its solid single-piece structure means the edges need no banding and resist water, and partitions stand on their own without a supporting frame.
Water-resistant protective top layer
Resin-impregnated decor paper (both faces)
Kraft layers pressed under high pressure
Water-resistant compact edge that needs no banding
It answers wet-area challenges — water, moisture, impact, vandalism, hygiene and fire — with a single panel system.
Stands up to constant wetness, steam and washing.
The non-porous surface makes it hard for microorganisms to settle.
Stands up to heavy public use and misuse.
Hinges, locks and legs are made of stainless steel or moisture-resistant materials.
Standard G-COM is rated B-s1,d0 at 12–25 mm; project-specific solutions are available for higher requirements.
Produced to size, color and hardware for each room.
Place the materials used for wet-area partitions side by side and compact laminate stands out clearly on water, hygiene and durability.
| Gülmar Compact Laminate | Melamine / Chipboard | Lacquered MDF | Metal / Sheet | |
|---|---|---|---|---|
| Water & Moisture Resistance | Yes | No | No | Partial |
| Resists Swelling / Warping | Yes | No | No | Yes |
| Non-porous / Hygienic | Yes | Partial | Partial | Partial |
| Vandal & Impact Resistance | Yes | No | No | Partial |
| Rust Resistance | Yes | Yes | Yes | No |
| No Supporting Frame Needed | Yes | No | No | No |
| Long Service in Wet Areas | Yes | No | Partial | Partial |
The table is indicative; final performance varies with application and maintenance.
Unlike traditional porous surfaces, compact laminate contains no voids for liquids and microorganisms to settle into. Its single-piece, water-resistant edge reduces the risk of a moisture bridge at the base of the cubicle, and the surface resists cleaning products containing disinfectants, chlorine and hydrogen peroxide (G-COM datasheet).
A transparent, controlled process from your room dimensions to an installation-ready cubicle system.
Room layout, cubicle count, panel (G-COM or CDF) and hardware requirements are defined.
The partition plan, color and hardware selection are prepared and approved in CAD.
Panels are cut to project size; hardware seats are machined to the millimeter.
Cubicles are labeled per room and securely packed.
Partitions are installed on site with a fast, clean fit-out.
Our G-COM compact cubicle panels are 12 mm thick and prepared to project specification in a choice of colors and hardware. CDF board values are on the CDF Board page.
Washrooms do not all work under the same conditions. We choose the panel and hardware by traffic, cleaning routine and specification.
Surfaces in hospitals and clinics are disinfected often. G-COM compact laminate offers a non-porous surface that withstands cleaning products containing disinfectant, chlorine and hydrogen peroxide.
In schools and campuses the priority is resistance to impact and misuse. Compact panels resist scratches and impact, and writing and graffiti clean off easily. In dry, well-ventilated washrooms 12 mm CDF can also be used.
In hotel public washrooms and spa areas, appearance matters too. Besides solid colors, we prepare cubicles in woodgrain and stone-look Gentaş decors to match the interior design.
Mall washrooms are in use all day and washed down often. The water-resistant compact edge, stainless steel hardware and self-closing hinges are chosen for that traffic.
On office floors we build cubicles in G-COM compact laminate; color and decor follow the floor design. In dry, well-ventilated washrooms, 12 mm CDF board can also be an option.
In showers, pools and wet changing areas we use G-COM, which withstands constant moisture: shower partitions, lockers and benches are made from the same panel.
Public projects usually specify a standard and a fire class. G-COM complies with EN 438-4 and is rated B-s1,d0 in 12–25 mm thickness.
In factories and warehouses we build toilet cubicles and staff changing rooms in G-COM compact laminate, and recommend it in particular where floors are hosed down. In dry rooms, CDF can also be an option when budget is the priority.
Compact laminate has a solid, homogeneous, non-porous structure; it resists water and moisture as well as swelling and warping. Its single-piece compact edge needs no separate banding, which reduces the risk of a moisture bridge at the base of the cubicle. This lets it keep its form for many years in constantly wet environments.
Yes. Toilet cubicles, washroom cubicles and WC cubicles are the usual names in the UK and the Gulf; toilet partitions and restroom partitions are the US names for the same system. "Phenolic partitions" describes the panel: compact laminate is pressed with phenolic resin. We build ours from 12 mm G-COM compact laminate with stainless steel hardware, cut to size for your layout.
Both look alike in a cubicle; how wet the room is and the specification decide. We recommend G-COM compact laminate for showers, pools, spas and wet changing areas, floors that are hosed down, projects requiring fire class B-s1,d0 or "EN 438 compact laminate", and public areas with heavy vandalism risk. In dry or splash-only, well-ventilated office, school, mall and factory washrooms, for lockers and for urinal partitions raised clear of the floor and away from direct water, 12 mm CDF board is a lighter and usually more economical alternative. CDF is not waterproof: panels should stand on legs clear of the floor and the room should be well ventilated.
Yes. We offer 12 mm CDF board either as sheets or CNC-cut to your project and installed with its hardware as turnkey cubicles. See the CDF Board page for details.
We use 12 mm G-COM compact laminate as standard for WC cubicle partitions, cubicle doors, urinal partitions and changing rooms. The CDF option is also 12 mm.
We choose materials suited to wet rooms: hinges, locks, connectors and legs are made of stainless steel or moisture-resistant nylon/glass fiber and resist corrosion. Hinges are self-closing and locks can include an occupancy indicator.
For G-COM we recommend six solid colors for cubicles (Gentaş code and swatch-book name in brackets): Ultra White (3103), Cream (3106 Beige), Office Gray (3153), Anthracite (3155 Anthracite Gray), Gray (3156 Dark Gray) and Black (3190); woodgrain, stone and other Gentaş decors can also be used. 12 mm CDF board comes in four solid colors: white, cream, office gray and anthracite. Contact us for other colors.
The price depends on the number and size of cubicles, the panel (G-COM compact laminate or 12 mm CDF), color or decor, the hardware set and whether installation is included. Share your room dimensions and cubicle count and we will prepare a quote for your project.
No. We do not sell portable or mobile toilet cabins. What we build are fixed cubicle and partition systems installed in washrooms inside buildings: compact laminate panels, cubicle doors, hardware and installation.
Yes. For G-COM and CDF cubicles, panels are prepared cut to project size, with hardware seats machined and labeled per room, and we install them on site on request.
Yes, on request. We are based in İzmir, Türkiye (Turkey). Send us your washroom layout or cubicle count and the destination and we will quote including packing. For orders abroad the cubicles are supplied as a set cut to size, with hardware seats machined, labeled per room and with stainless steel hardware, ready for your own installer.How ordering from abroad works
Share your room dimensions or layout drawing, cubicle count, conditions of use and hardware preferences; we will recommend the right panel (G-COM or CDF), color and system and prepare a quote. Ordering from abroad? Add your destination and we will quote including packing.